HOME : PRODUCT INFORMATION : PRODUCT TYPES
GO
 
PRODUCT INFORMATION
PRODUCT TYPES
STANDARD
4" 3-CELL
3" 3-CELL
2" 3-CELL
2" 2-CELL
2" 1-CELL
FIRE RESISTANT
DETECTABLE
MICRO
SELF-SUPPORTING MAXCELL
INSTALLATION ACCESSORIES
TERMINATION ACCESSORIES
APPLICATION GUIDE
PART NUMBERS
REEL SIZES
INSTALLATION INSTRUCTIONS
ELECTRONIC CATALOGS
MAXSPACE

Product Types

MaxCell offers a wide range of fabric innerduct products for the OSP and Premise markets. These products are designed with our customers’ needs in mind and are engineered for use in even the most difficult of applications.

MaxCell comes in a variety of sizes and configurations – all tailored to maximize your network structure. And with a complete line of complementary Installation and Termination accessories, we can provide a total package to make your network installation a breeze.

** PLEASE NOTE: Designers should make every effort to conform to industry standards with regard to distances between any two pull points (generally 600 to 1000 feet), number of bends (maximum of two 90 degree bends or a total of 180 degrees) between any two pull points, and proofing of conduit pathway using appropriately sized mandrels (normally ¼ to ½ inch less than the inside diameter of the conduit).**
Standard
Our Standard MaxCell product is a versatile solution for the complex problems faced by today’s engineers, contractors, and network providers. Manufactured from internally designed and produced materials, this model yields superior performance over existing rigid innerduct:
  • Melt point of 419 °F - almost 2X of HDPE
  • Resistant to ground chemicals and petroleum products
  • Pre-lubed for lower friction during MaxCell and cable installation
Standard MaxCell is available in sizes from 1.1" to 4", and in 1, 2 and 3-Cell configurations – giving you the flexibility to choose the right product for your system & your application.

4" 3-Cell
MaxCell 4in 3-CellFor use in 4" or larger conduits, the 4" 3-Cell product is designed to hold larger backbone cables up to 1.50" in diameter in each cell. Up to two packs can be placed in a 4" conduit.
  • Standard color is green
  • Color-coded pull tapes are pre-installed
  • Factory lubricated

3" 3-Cell
MaxCell 3in 3-CellFor use in 3" or larger conduits, the 3" 3-Cell product is designed to hold cables up to 1.05" in diameter in each cell. Up to 3 packs can be placed in a 4" conduit.
  • Standard colors are black, blue and red
  • Color-coded pull tapes are pre-installed
  • Factory lubricated

2" 3-Cell
MaxCell 2in 3-CellFor use in 2" or larger conduits, the 2" 3-Cell product is designed to hold three cables up to 0.85" in diameter in each cell.
  • Standard color is yellow
  • Color-coded pull tapes are pre-installed
  • Factory lubricated

2" 2-Cell
MaxCell 2in 2-CellFor use in 2" conduits, the 2" 2-Cell product is designed to hold two cables up to 0.85" in diameter in each cell.
  • Ideal for overlay of where one cable exists in a 2" conduit
  • Color-coded pull tapes are pre-installed
  • Factory lubricated
View 2" 2-Cell MaxCell Information Sheet

2" 1-Cell
MaxCell 2in 1-CellFor use in 1.5" or larger conduits, the 2" 1-Cell product is designed to hold cables up to 0.85" in diameter in each cell.
  • Standard color is white
  • Color-coded pull tapes are pre-installed
  • Factory lubricated

Fire Resistant
MaxCell - Fire ResistantUL Listed Plenum & Riser Rated MaxCell

MaxCell's Plenum and Riser rated products are Low Smoke Zero Halogen versions for use in premise wiring. These products provide numerous low friction pathways for installation of multiple cables in a variety of building environments – including air handling space, raised floors, cable trays and riser ducts.

Plenum & Riser rated MaxCell allow for incremental deployment of cables as needed, as well as easy removal of obsolete and abandoned cables.

Plenum MaxCell is available in sizes from Micro to 3" 3-Cell, while Riser is available in sizes from Micro to 4". All products meet the requirements of Underwriters Laboratory standard Test Method No. 2024.

View Plenum & Riser Information Sheet

Detectable
MaxCell - DetectableDetectable MaxCell is configured like our standard product, but contains an 18 gauge copper tracer wire inserted in the edge for use in underground utility location.

An embedded feature, Detectable MaxCell will not entangle or impede cable installation nor increase cable pulling tensions. The wire is permanent and will not be removed as is the case with detectable pulling tapes. In addition, the wire is protected – this means no damage to it or the cables and ensuring locate ability for years to come.

Detectable MaxCell is available in sizes from micro to 4".

View Detectable MaxCell Information Sheet

Micro
MaxCell - MicroIn addition to our core MaxCell products, there are now several versions of Micro MaxCell products for use in 1.0" to 2.0" conduits. Designed for use in FTTX applications, this smaller version is ideal for:
  • Underground and aerial ducts
  • MDU environments where frequent entry in conduit is required
  • Remote terminals, pedestals and CEV’s
Micro MaxCell products can be used to create additional pathways in small conduits for Intelligent Transportation Systems (ITS) and Signalization projects.
View Micro MaxCell Information Sheet

Self-Supporting MaxCell
Self-Supporting MaxCell

Self-Supporting MaxCell is a flexible fabric pathway system designed specifically for transporting cables efficiently in data centers, drop ceilings, and areas that require adaptable reconfigurations. The integrated support structure and multiple pathways reduce the steps required to place cables, minimizing the time require for cable installation.

Key Features

  • Plenum-rated MaxCell
  • Configured with 3 cells to support network flexibility and growth
  • Pre-installed galvanized support wire – strong and flexible
  • Pre-installed color-coded pulling tapes to speed cable installation
  • Works with support systems from an extensive group of manufacturers
Part Number # Pathways Product Width Maximum
Aggregate Cable
Diameter
Static Load
F
MXP43SSXX
(Can be ordered in 5’ increments 500’-2650’)
3 3.3” 1.8” 20lb

Benefits

  • Install MaxCell the same as a standard wire install.
  • Install bundles of 24 CAT 6 cables without Velcro™ or Cable ties.
  • Up to 72+ Cables in one MaxCell pack.
  • Reduce cable install by up to 30% compared to cable tray.
  • Reduce cable damage and installation re-work.
Self-Supporting MaxCell is a constructed of the same fire retardant components used in our Plenum-Rated products.

Component Material
Fire Resistant Fabric
  • Fire Resistant Nylon Monofilament
  • Low Smoke / Zero Halogen
  • Class UL94 V-0
  • Plenum Rated OFCR FT6
Support Cable
  • Galvanized 7x7 Stranded Steel
  • 3/32” diameter
  • Load Rating: 920lbs
  • Weight: 1.6lbs per 100ft.
Pull Tape
  • High Tenacity Polyester
  • 500lb or 1250lb rating
Operating Range
  • 22 to 212o F
Length Tolerance
  • -0 to +0.5%

Note: all specifications are subject to change without prior notice

Fifty-Four (54) CAT 6A cables exiting Self-Supporting MaxCell
Fifty-Four (54) CAT 6A cables exiting Self-Supporting MaxCell

View Self-Supporting MaxCell Details
View Self-Supporting MaxCell Packaging Information
View Self-Supporting MaxCell Spec Sheet

 
© 2014 MAXCELL INNERDUCT. ALL RIGHTS RESERVED.   •   600 PLUM CREEK DRIVE   •   WADSWORTH, OH 44281   •   1.888.387.3828